Description
The Cadillac Reformer is Elina Pilates' convertible: a commercial-grade trapeze table and a full reformer in one frame, switching between the two roles without tools. Twin drop-in mats convert the carriage into a cadillac bed that one person can handle, and the tower carries a 3-height push-through bar with safety strap, a padded trapeze bar with covered springs, and a solid roll-down bar. In reformer mode you get quick-release shoulder rests, a 3-position headrest, adjustable ropes, and a built-in non-slip standing platform.
Both modes share six bed springs (2 yellow very light, 2 green medium, 2 red heavy), with two long yellow and two long green springs for tower work. It suits studios that want cadillac programming but cannot give 94.5" × 30.7" (240 × 78 cm) of floor to each apparatus. The trade-off is mass: at 392 lb (178 kg) this machine stays where you assemble it. Studios that need to move equipment between classes should pick a tower reformer instead.
Features
- Converts between commercial-grade cadillac and full reformer, no tools required
- Twin drop-in mats, light enough for one person to place and remove
- Push-through bar in anodized aluminum, adjustable to 3 heights, with safety strap; assembles as a 3-sided bar
- Padded trapeze bar with spring collars and covered springs
- Six bed springs with snaps: 2 yellow (very light), 2 green (medium), 2 red (heavy)
- Long tower springs: 2 yellow (very light), 2 green (medium)
- Quick-release, adjustable, removable shoulder rests
- Padded headrest with 3 positions: two above the carriage, one level with it
- Adjustable ropes with snaps; triple D-ring cotton loops, double loops, single loops, and pulleys (1 pair each)
- Built-in standing platform with non-slip surface
- Solid roll-down bar and padded foot stopper
What's included
- Convertible cadillac-reformer frame with carriage
- Twin drop-in mats
- Push-through bar with safety strap
- Padded trapeze bar with spring collars and springs
- Bed springs: 2 yellow (very light), 2 green (medium), 2 red (heavy)
- Long springs: 2 yellow (very light), 2 green (medium)
- Solid roll-down bar
- 1 pair of fuzzy grips
- 1 pair of single loops
- Stability sling (2 pieces)
- Foot straps (2 pairs)
- Triple D-ring cotton loops (1 pair), double loops (1 pair), pulleys (1 pair)
- Quick-release shoulder rests (1 pair)
- Padded foot stopper
Dimensions
Assembled: 94.5" L × 30.7" W (240 × 78 cm); bed height 22" (56 cm); tower height 84.3" (214 cm) minimum, so check rooms with ceilings under 7.5 ft. Machine weight 392 lb (178 kg).